Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 153

Section 10 MAINTENANCE AND OPERATION INFORMATION 2. Specifications Type Desktop Original table Fixed type Copying system Indirect electrostatic, internal transference drum Acceptable originals Sheets of paper, books and 3-dimensional objects (Maximum size: 11" x 17" [A3]) Copy sizes 5 1/2" x 8 1/2", 8 1/2" x 11", 11" x 8 1/2", 8 1/2" x 14", 11" x 17" and 12" x 18" [A6R, B6R, A5R, B5, A4R, A4, B4, A3, A3 wide (305 mm x 457 mm) and Folio] Print margin loss: 0.5 mm - 5.5 mm Copying speed Full color: 8 copies/min., Monochrome or monocolor: 30 copies/min. During 2-sided (duplex) copying - Full color: 4 copies/min., Monochrome or monocolor: 6 copies/min. Warm-up time Within 300 secs.(at room temperature of 68°F/20°C, humidity 65%RH), First copy speed Full color: Approx. 24 secs. Monochrome or monocolor: Approx. 10.8 secs. Available magnification ratios Any 1% increment between 25% and 400% or standard pre-set ratios. Memory Standard copiers: 128 MB of Bitmapping memory Duplex copiers: 256 MB of Bitmapping memory and 10 GB of image storage memory Resolution Reading: 600 x 600 dpi Writing: 600 x 600 dpi Paper feed system Automatic feeding from drawers (Standard copiers: 2 drawers, Duplex copiers: 1 drawer; each with a 500 sheet capacity [75 g/m2 - 90g/m2]) or manual feed from the multi-bypass tray (150 sheet capacity [75 g/m2 - 90g/m2]) Acceptable copy paper Drawers and Duplex Unit: Standard copy paper (75 g/m2 - 90g/m2) Multi-bypass tray: Standard copy paper (60 g/m2 - 220 g/m2), special paper (Color paper, OHP transparencies, etc.) and envelopes [only available when the optional printer functions are used] Continuous copying 1 - 999 sheets Light source Rare gas lamp Developing system Dry dual-element process Fixing system Heat roller Cleaning system Blade and fur brush Photoconductor a-Si (amorphous silicon) Standard functions and modes Self-diagnosis function, preheat function, auto exposure adjustment function, original size detection function, auto paper selection mode, original mode, mono-color mode, auto color selection adjustment function, color adjustment functions, auto magnification selection mode, zoom mode, preset zoom mode, XY zoom mode, interrupt copying, 2-sided copy modes*1, page separation modes, margin mode*2, border erase modes*2, invert mode, mirror image mode, print page numbers mode*2, transparency + backing sheet mode*2, presentation mode*2, insert sheet modes*2, layout modes*2, booklet mode (sheet originals)*1, booklet mode (book originals)*1, BW/Selection mode*2, poster mode*2, filing mode*2, program function, recall function, sort mode*2, copy management function*2, language selection function *1: Only available in duplex copiers *2: Requires the optional Memory Copy Board in standard copiers Power source 120V AC, 60 Hz, 12 A 220V - 240V AC, 50/60 Hz, 6.5 A (Max) Power consumption Maximum rated power consumption 1440 W Dimensions (W) x (D) x (H 23 1/4" x 23" x 33 9/16" 590 mm x 585 mm x 853 mm Weight Approx. 253 lbs. / Approx. 115 kg (Standard copier with the optional Paper Feeder installed) Noise Emission 70 dB(A) Required space (W) x (D 50 11/16" x 23" 1288 mm x 585 mm Optional equipment SRDF (Sheet-thru Reverse Document Feeder), Paper Feeder, Document Finisher, Memory Copy Board*, Casters, Key Counter, Printer Kit, Fax Kit (only available in inch specification copiers), Network Scanner Kit *: Standard equipment in duplex copiers (Specifications are subject to change without notice.) 10-2