Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 35
Replacing the oil roller
View all Kyocera KM-C830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Section 3 PREPARATIONS 4. Replacing the oil roller After approximately 25,000 copies, "Time to replace the oil kit." or "Replace the oil kit now" will appear. In this case, perform the following procedure in order to replace the oil roller. 1 Open the front cover. 3 Slide the oil roller release levers (shown as 1 in the illustration) away from the roller and then remove the oil roller from the copier. 1 2 Operate the paper conveyor release lever and pull the paper conveyor out towards you. 4 Remove the protective seals from each side of the new oil roller. WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. 5 Remove the new oil roller from its cover. 3-13