Kyocera TASKalfa 2420w TASKalfa 2420w IPS Touch Screen Operation Guide - Page 184
Network, Dynamic Host Configuration Protocol
View all Kyocera TASKalfa 2420w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
*145PVDI4DSFFO Network When setting up the Printer on the Network at the site the IPS comes already pre-configured for DHCP (Dynamic Host Configuration Protocol) and if plugged into the network will automatically receive an IP Address from the DHCP Server. If the Site is not using a DHCP server to dish out IP address it will be necessary to assign a Static IP Address to the Printer. The onsite network administrator will need to supply all of the valid information for the IP Address scheme that will be applied to the Printer. Default Example Static IP Example NOTE Incorrect settings will prevent your system from functioning. Do not enter or modify without your Network Administrators permission. Access to modify may be locked and may only be granted by a certified service technician. This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from. 2011. - 183 -