Kyocera TASKalfa 3510i 3010i/3510i Operation Guide - Page 104
Setting, Description, SMTP Security
View all Kyocera TASKalfa 3510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Installing and Setting up the Machine > Command Center RX 2 Configure the settings. Enter the appropriate values to each field. SMTP POP3 Setting SMTP Protocol SMTP Server Name SMTP Port Number SMTP Server Timeout Authentication Protocol SMTP Security POP before SMTP Timeout Connection Test Domain Restriction POP3 Protocol Check Interval Run once now Domain Restriction POP3 User Settings Description Set to send e-mail from the machine. Set SMTP protocol. Set the "SMTP (E-mail TX)" setting to [On] on the [Protocol Settings] page. Enter the host name or IP address of the SMTP server. Specify the port number to be used for SMTP. Use the SMTP default port 25. Set the amount of time to wait before time-out in seconds. Set whether SMTP authentication is used. To use authentication, enter the user information for authentication. Set SMTP security. Turn on "SMTP Security" in "SMTP (E-mail TX)" on the [Protocol Settings] page. Specify the time in seconds until the connection to the POP server times outs. This can be set when [POP before SMTP] is selected in "Authentication Protocol". Tests to confirm that the settings are correct. Set whether or not domains are restricted. Click the [Domain List] and enter the domain names of addresses to be allowed or rejected. Restriction can also be specified by e-mail address. Set to receive e-mail at the machine. Set POP3 protocol. Set the "POP3 (E-mail RX)" setting to [On] on the [Protocol Settings] page. Specify the interval for checking for incoming e-mail in minutes. Click [Receive] to connect to the POP3 server immediately and check for incoming E-mails. Set whether or not domains are restricted. Click the [Domain List] and enter the domain names of addresses to be allowed or rejected. Restriction can also be specified by e-mail address. Configure the settings for POP3 user accounts and the POP3 server. You can configure up to three users. 2-44