Kyocera TASKalfa 3510i 3010i/3510i Operation Guide - Page 452

Troubleshooting > Troubleshooting Symptom Checkpoints Printouts have vertical lines. Is the slit glass dirty? Corrective Actions Clean the slit glass. Reference Page page 10-3 Dirt on the top edge or back Check the machine interior. of the paper. Open the right cover. If the machine ― interior is dirty with toner, clean it using soft, dry, lint-free cloth. Part of the image is ― periodically faint or shows white lines. ― Open and then close the right cover. Run [Drum Refresh]. ― page 10-34 Print on the back of the ― sheet is visible on the front. Set [Prevent Bleed-through] to [On]. page 6-24 page 8-17 Perform Tone Curve Adjustment in the System Menu. is displayed. Cannot create Searchable PDF file. Cannot search a text that you want to search on the PDF file. Over long periods of use, the effects of the ambient temperature and humidity can cause output hues to vary slightly. Run [Tone Curve Adjustment]. page 10-33 Is the proper language selected? Check the language to extract. page 6-57 Can the texts on the original not be recognized as texts, or is the PDF creation time taken? Check the following: • The original orientation is correct. • When setting the originals with the mixed orientation at once, [On] is selected for [Auto Image Rotation]. page 6-57 Have you set [OCR Text Recognition] in Set [OCR Text Recognition] in [File [File Format]? Format]. page 6-57 Are the texts of the scanned original fainted or too light? Set [Density] to darker level. page 6-20 Is the background of the scanned original too dark and the texts are difficult to recognize? Set [Background Density Adj.] to [On] or [Manual] and manually adjust the density lighter. Otherwise, set [Density] to darker level. page 6-20 page 6-23 Is the text or image on the back of the original visible on the front? Set [Prevent Bleed-through] to [On]. page 6-24 10-18