LG 50144815 Owners Manual - Page 10

Removing, Refrigerator, Doors

Page 10 highlights

REMOVING REFRIGERATOR DOORS 1. Removing Refrigerator Door NOTE: Handle appearance may vary. IMPORTANT: Before you begin, turn the refrigerator OFF and unplug it. Remove food and any bins from doors. Left Door o Loosen the screws and remove the cove on back side (see figure A). o Disconnect water supply tube by pushing back on the disconnect ring (3). • Loosen the cover screw (1). o Disconnect door switch wire (2). • Pull out the tube (4). [] CAUTION: If a tube end is deformed or worn out, cut the damaged portion away. o Disconnect wire harness (5). o Remove the ground screw (6). o Loosen screws (7) and lift off the top hinge (8). Place the door on a non-scratching surface with the inside up. [] CAUTION: When removing top hinge, be careful that the door does not fall forward. Right Door o Loosen the cover screw (1). o Disconnect door switch wire (2). o Loosen screws (7) and lift off the top hinge (8). o Place the door on a non-scratching surface with the inside up. / (5) (7) (8) (2) (8) Figure A "% 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

REMOVING
REFRIGERATOR
DOORS
1. Removing
Refrigerator
Door
NOTE: Handle appearance
may vary.
IMPORTANT:
Before you begin, turn the refrigerator
OFF and unplug it. Remove
food and any bins from doors.
Left Door
o Loosen the screws and remove the cove on back side (see figure A).
oDisconnect
water supply tube by pushing back on the disconnect
ring (3).
• Loosen the cover screw
(1).
oDisconnect
door switch wire (2).
• Pull out the tube (4).
[]
CAUTION:
If a tube end
is
deformed
or worn
out, cut the damaged
portion
away.
oDisconnect
wire harness
(5).
oRemove
the ground
screw (6).
oLoosen screws (7) and lift off the top hinge (8).
Place the door on a non-scratching
surface with the inside up.
[]
CAUTION:
When
removing
top hinge,
be careful
that the door
does not fall forward.
Right
Door
oLoosen the cover screw
(1).
oDisconnect
door switch wire (2).
oLoosen screws (7) and lift off the top hinge (8).
oPlace the door on a non-scratching
surface with the inside up.
(7)
(8)
/
(5)
(2)
(8)
Figure
A
"%
10