LG 50144815 Owners Manual - Page 50

Alignment

Get LG 50144815 - LFX23961ST 22.6 cu. ft. Refrigerator PDF manuals and user guides
UPC - 048231782395
View all LG 50144815 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

LEVELING AND DOOR ALIGNMENT Leveling Your refrigerator has two front leveling screws, one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below: 1. Plug the refrigerator's power cord into a 3-prong grounded outlet. Move the refrigerator into its final position. 2. Turn the leveling screw clockwise to raise that side of the refrigerator or counterclockwise to lower it. It may take several turns of the leveling screw to adjust the tilt of the refrigerator. NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws. This makes it easier to adjust the screws. Door Alignment If the space between your doors is uneven, follow the instructions below to align the doors: 1. With one hand, lift up the door you want to raise at middle hinge. 2. With other hand, use pliers to insert snap ring as shown. 3. Insert additional snap rings until the doors are aligned. (Three snap rings are provided with unit.) \\\ 3. Open both doors again and check to make sure that they close easily. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws clockwise. It may take several more turns, and you should turn both leveling screws the same amount. 4. Re-adjust if necessary. 5. Replace the base cover. NOTE: Your new refrigerator is uniquely designed with two fresh food doors. Either door can be opened or closed independently of one another. You may have to exert slight pressure on doors to get them to close completely. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
LEVELING
AND
DOOR
ALIGNMENT
Leveling
Your refrigerator
has two front leveling screws,
one on
the right and one on the left. If your refrigerator
seems
unsteady or you want the doors to close easier, adjust the
refrigerator's
tilt using the instructions
below:
1. Plug the refrigerator's
power cord into a 3-prong
grounded
outlet. Move the refrigerator
into its final
position.
2. Turn the leveling screw clockwise
to raise that side of
the refrigerator
or counterclockwise
to lower it. It may
take several turns of the leveling screw to adjust the tilt
of the refrigerator.
NOTE: Having someone
push against the top of the
refrigerator
takes some weight off the leveling screws.
This makes
it easier to adjust the screws.
\\\
Door Alignment
If the space between your doors is uneven, follow the
instructions
below to align the doors:
1. With one hand, lift up the door you want to raise at
middle hinge.
2. With other hand, use pliers to insert snap ring as
shown.
3. Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with unit.)
3. Open both doors again and check to make sure that
they close easily. If not, tilt the refrigerator
slightly
more
to the rear by turning both leveling screws clockwise.
It
may take several more turns, and you should turn both
leveling screws the same amount.
4. Re-adjust if necessary.
5. Replace the base cover.
NOTE: Your new refrigerator
is uniquely designed with
two fresh food doors. Either door can be opened or
closed independently
of one another. You may have to
exert slight pressure on doors to get them to close
completely.
14