LG 50144815 Owners Manual - Page 47

tightening. And make sure the door is straight and the gap between the doors is even.

Page 47 highlights

2.Replacing Refrigerator Door Right Door o Lower the door onto the middle hinge pin (9). Make sure the door is aligned with the cabinet. ° Replace the top hinge (8) installing hinge screws (7) to secure it. o Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side while securing hinge. Make sure the door is straight and the gap between the doors is even. • Connect the door switch wire (2). o Tighten the cover screw (1). Left Door • Lower the door onto the middle hinge pin (10). Make sure the door is aligned with the cabinet. • Replace the top hinge (8) installing hinge screws (7) to secure it. • Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side while tightening. And make sure the door is straight and the gap between the doors is even. o Insert the water supply tube (4) into the connector tube until you see only one scale mark, (Fully insert the tube over 5/8" (15 mm)). • Install the ground screw (6) and connect the wire harness (5). " Connect the door switch wire (2). o Tighten the cover screw (1). • Disassembly : 1. PuHHout tube whime pressing coNHetsand disassembHe it. Cotlet ] Insert , Assembly : Connecting tube color • Blue to Blue , White to White 1. hsert tube until you can see onHyone line. 2. After inserting, puIHout tube to check if it's properHy inserted. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

2.Replacing
Refrigerator
Door
Right
Door
o Lower the door onto the middle hinge pin (9). Make sure the door is aligned with the cabinet.
° Replace the top hinge (8) installing hinge screws (7) to secure it.
o Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side while
securing
hinge. Make sure the door is straight and the gap between the doors is even.
• Connect the door switch wire (2).
oTighten the cover screw (1).
Left
Door
• Lower the door onto the middle hinge pin (10). Make sure the door is aligned with the cabinet.
• Replace the top hinge (8) installing hinge screws (7) to secure it.
• Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side while
tightening. And make sure the door is straight and the gap between the doors is even.
o Insert the water supply tube (4) into the connector tube until you see only one scale mark,
(Fully insert the tube over 5/8" (15 mm)).
• Install the ground screw (6) and connect the wire harness (5).
" Connect the door switch wire (2).
oTighten the cover screw (1).
• Disassembly
:
1. PuHHout tube whimepressing
coNHetsand disassembHe
it.
Cotlet
Insert
Connecting
tube
color
• Blue to Blue
, White
to White
, Assembly
:
1. hsert
tube until you can see onHyone line.
2. After inserting,
puIHout tube to check if it's properHy inserted.
]
11