LG 50PM4M Owners Manual - Page 10

Introduction Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. AV Each time you press the INPUT button it will change to AV Component1 Component2 RGB HDMI/DVI. SLEEP Sets the sleep timer. PSM Adjusts the factory preset picture according to the room. NUMBER buttons There is not a function which is supported. MENU Displays on screen menus one by one. Exits the current menu. Memorizes menu changes. MUTE Switches the sound on or off. POWER AV INPUT SLEEP PSM ARC AUTO 1 2 3 4 5 6 7 8 9 0 MENU EXIT SET MUTE * POWER switches the set on from standby or off to standby. INPUT Selects the AV, Component, RGB or HDMI/DVI modes. switches the set on from standby. AUTO Automatic adjustment function. (Operational for the analog signal only) ARC Changes the picture format. There is not a function which is supported. EXIT Clears all on-screen displays and returns to monitor viewing from any menu. SET accepts your selection or displays the current mode. F /G Volume Up/Down D /E Adjusts menu settings. Selects menu item. * : No function Installing Batteries • Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). • Install two 1.5V AAA batteries. Don't mix old or used batteries with new ones. Replace cover. 10 Plasma Monitor