LG DLEX7600VE Owners Manual - Page 41

ENGLISH Cycle Settings and Options Cycle Modifier Buttons SENSOR DRY cycles have preset settings that are selected automatically. MANUAL DRY cycles have default settings, but you may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. Dry Level Selects the level of dryness for the cycle. Press the Dry Level button repeatedly to scroll through available settings. •• This option is only available with SENSOR DRY cycles. •• The dryer will automatically adjust the cycle time. Selecting More Dry or Very Dry will increase the cycle time, while Less Dry or Damp Dry will decrease the cycle time. •• Use a Less Dry or Damp Dry setting for items that you wish to iron. Temp. Adjusts the temperature setting. This allows precise care of your fabrics and garments. Press the Temp. Control button repeatedly to scroll through available settings. Time Dry Allows you to manually select the drying time, from 20 to 60 minutes, in 10-minute increments. Use this for small loads or to remove wrinkles. OPERATION 41 Cycle Option Buttons The dryer features several additional cycle options to customize cycles to meet individual needs. Certain option buttons also feature a special function that can be activated by pressing and holding that option button for 3 seconds. (See Special Functions on the following page for details.) Adding Cycle Options to a Cycle: 1 Turn on the dryer and press the CYCLE buttons to select the desired cycle. 2 Use the cycle modifier buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message is shown in the display. 4 Press the START/PAUSE button to start the cycle. The dryer starts automatically. Wrinkle Care Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to remove items from the dryer immediately. Damp Dry Signal With this option, the dryer will signal when the load is approximately 80% dry. This allows you to remove faster- drying lightweight items or items that you would like to iron or hang while still slightly damp. More Time/Less Time Use the More Time/Less Time buttons to add or reduce the drying time of a MANUAL DRY cycle in 1-minute increments. Signal (Option) Press the Signal (Option) button repeatedly to change the volume or turn on/off the button tones and the end of cycle melody.