LG DLG1502W Owners Manual - English Spanish - Page 33

ENGLISH HOW TO USE 33 Cycle Settings And Options (cont.) Custom Program Damp Dry Signal With this option, the dryer will signal when the load is approximately 80% dry. This allows you to remove faster- drying lightweight items or items that you would like to iron or hang while still slightly damp. Press the Damp Dry Signal button to activate or deactivate Damp Dry Signal. Wrinkle Care Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to remove items from the dryer immediately. If you have a special combination of settings that you use frequently, you can save these settings as a Custom Program.. * To Save a Custom Program: 1. Turn on the dryer and press the Cycle Buttons to select the desired cycle. 2. U se the cycle setting buttons to adjust the settings for that cycle. 3. P ress the cycle option button(s) for the option you would like to add. 4. P ress and hold the Custom PGM button for 3 seconds. Special Functions The option buttons also activate special functions, including Child Lock. Press and hold the Child Lock button marked with the special function. * Child Lock Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Press and hold the Damp Dry Signal button for 3 seconds to activate or deactivate the Child Lock function. The Child Lock icon will be shown in the display, and all controls are disabled except the POWER button. NOTE Once set, Child Lock remains active until it is manually deactivated. Child Lock must be turned off to run another cycle. To deactivate Child Lock, press and hold the Damp Dry Signal button for three seconds. NOTE You may save only one custom program at a time. Pressing and holding the Custom PGM button will overwrite any previously saved custom program. To Recall a Custom Program: 1. Turn on the dryer. 2. Press the Custom PGM button. 3. Press the START/PAUSE button to start the cycle. Energy Saver This option helps to reduce the energy consumption in the Normal Cycle, depending on the load size. When the Energy Saver option is selected, the cycle begins with an air dry section and the drying time is increased. NOTE The Energy Saver option is turned on by default in the Normal Cycle. Turn off the Energy Saver option for a faster Normal cycle which begins with heated drying. * Default On/Off This option allows the Energy Saver settings to be changed. To run a Normal cycle without the Energy Saver option, press and hold the Energy Saver button for three seconds. ON or OFF appears in the display. MFL67731056_en_150715.indd 33 2015.7.15 3:39:4 PM