LG LDF5678SS Owners Manual - Page 20
Connecting Water Supply Line and Power, Connecting Power
View all LG LDF5678SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH Connecting Water Supply Line and Power Connecting Water Supply Line 1 With the home water supply turned off, connect the water supply line to the inlet valve on the left front of the dishwasher. CAUTION ••Tape or compound should not be used on dishwasher inlet valve. 2 Tighten the compression nut. INSTALLATION 19 NOTE ••The best location for the electrical conduit is on the right side of the back wall. Re-route the electrical cable before installation if the electrical conduit pipe is longer than 3" (76 mm) and is centered on the back wall. 1 Turn off electrical power to the unit at the circuit breaker. 2 Use a Phillips screwdriver to remove the screw from the junction box cover and remove the cover. 3 Slide the water supply line back through the channel, pulling gently from inside the cabinet to make sure the line is not kinked, pinched, stressed or crushed. 3 Use a Phillips screwdriver to remove 2 screws . Connecting Power The dishwasher should have a dedicated properly grounded branch circuit to connect the 3 wire setup which includes the ground wire. If a 3-prong power supply is used, it should be in an accessible location adjacent to the dishwasher within 4 ft. (1.22 m) of the dishwasher side and not behind the dishwasher. 4 Remove the junction box from the appliance.