LG LDF5678SS Owners Manual - Page 41

40 OPERATION Adding Rinse Aid to the Dispenser The Rinse Aid indicator appears in the display when more rinse aid is needed. The use of rinse aid is recommended to prevent water spots on dishes and to enhance drying performance. 1 Open the rinse aid lid by lifting up the flap. Rinse Aid Dispenser Adjustment The dispenser has five adjustment levels. The dishwasher is programmed at the factory for a rinse aid dispenser level of 2. This can be checked and altered by using the buttons on the control panel. 1 Ensure the appliance is off. 2 Press Dual Zone and Power simultaneously to check the current setting. 3 Press Delay Start to change the rinse aid dispenser setting. Each press of the button changes the setting one step from L0 to L4. 2 Add a liquid rinse aid to the maximum fill level. The rinse aid should be settled in the dispenser while filling, or air bubbles may result in poor drying performance. Avoid overfilling the dispenser. 4 Once the desired rinse aid dispenser setting is selected, press Start to save. NOTE ••Adjust the setting higher if you have hard water and notice calcium buildup on your dishes. ••Setting the rinse aid control too low will contribute to spotting and streaking on dishes and poor drying performance. ••Setting the control too high can cause foaming, which will cause poor wash performance. 3 Close the lid to lock the dispenser. Rinse aid is dispensed automatically during the final rinse cycle. Refilling the Rinse Aid How often the dispenser needs to be refilled depends on how often dishes are washed and the rinse aid setting used. ••The Rinse Aid icon flashes when more rinse aid is needed, unless the rinse aid dispenser setting is set to L0. NOTE ••Only use liquid rinse aid in the dishwasher. ••Do not overfill the rinse aid dispenser. ••Wipe off any spilled rinse aid around the dispenser.