LG LNXS30866D Owners Manual - Page 12
Removing/Assembling the Doors
View all LG LNXS30866D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH 12 INSTALLATION Ambient Temperature Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected. Measuring the Clearances Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches (5.08 cm) between the back of the refrigerator and the wall. Removing/Assembling the Doors Removing the Left Refrigerator Door 1 The water supply is connected to the upper right part of the rear surface of the refrigerator. Remove the ring in the joint area. Hold the water supply connection and gently push the Collet to detach the water supply line as shown in . Collet 24" (61 cm) 2" (5.08 cm) Note Detachment of the water supply line is applicable only when detaching the left refrigerator door. 2 Remove the screw from the hinge cover at the top of the refrigerator. Lift the hook (not visible), located at the bottom of the front side of the cover with a flat-head screwdriver.