LG LNXS30866D Owners Manual - Page 41

Removing/Assembling the, Fresh Zone Compartment, Model: LNXS30866

Page 41 highlights

ENGLISH HOW TO USE 41 Removing/Assembling the Fresh Zone Compartment (Model: LNXS30866*) Removing the Fresh Zone Compartment 1 Open both refrigerator doors completely and empty and remove the Door-in-Door case and bins. Empty contents from glass cover and drawers. Assembling the Fresh Zone Compartment 1 Hold the cover at a 45-degree angle and insert it into the refrigerator. 2 Supporting the cover with one hand, bring the cover to a horizontal position and lower it onto the guides. Push the cover back into place. 2 Lift the front of one drawer to remove it from its guides and pull straight out. Repeat to remove the second drawer. 3 Tilt up the front of one drawer and insert the rollers into the side guides. Lower the drawer and push it in. Repeat with second drawer. 3 Support underneath the glass cover with one hand while lifting the front of the cover with the other hand. Push up from underneath to release the cover from the guides, then tilt the cover 45 degrees, and pull it forward to remove it. Caution yy Remove items from on top of glass cover before removing cover. yy Take care when handling the glass cover. There is still a risk of injury if the glass is broken, even though it is tempered glass. yy Take care when removing or assembling the cover not to catch hands between the cover and the drawers.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

41
HOW TO USE
ENGLISH
CAUTION
Remove items from on top of glass cover
y
before removing cover.
Take care when handling the glass cover.
y
There is still a risk of injury if the glass is
broken, even though it is tempered glass.
Take care when removing or assembling
y
the cover not to catch hands between the
cover and the drawers.
Removing/Assembling the
Fresh Zone Compartment
(Model: LNXS30866*)
Removing the Fresh Zone
Compartment
1
Open both refrigerator doors completely
and empty and remove the Door-in-Door
case and bins. Empty contents from glass
cover and drawers.
2
Lift the front of one drawer to remove
it from its guides and pull straight out.
Repeat to remove the second drawer.
3
Support underneath the glass cover with
one hand while lifting the front of the
cover with the other hand. Push up from
underneath to release the cover from the
guides, then tilt the cover 45 degrees, and
pull it forward to remove it.
Assembling the Fresh Zone
Compartment
1
Hold the cover at a 45-degree angle and
insert it into the refrigerator.
2
Supporting the cover with one hand, bring
the cover to a horizontal position and lower
it onto the guides. Push the cover back
into place.
3
Tilt up the front of one drawer and insert
the rollers into the side guides. Lower the
drawer and push it in. Repeat with second
drawer.