LG M4210C-BA User Guide - Page 41
Connecting, the cable, Communication, Parameter
UPC - 719192183568
View all LG M4210C-BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. @ Connecting the cable Connect the RS-232C cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC. RS-232C Cable (not included) PC monitor 1 monitor 2 monitor 3 monitor 4 @ Communication Parameter • Baud Rate : 9600bps (UART) • Data Length : 8bits • Parity Bit : None • Stop Bit : 1bit • Flow Control : None • Communication Code : ASCII code @
Use this method to connect several products to a single PC.
You can control several products at a time by connecting them to a single PC.
@
Connecting
the cable
Connect the RS-232C cable as shown
in the picture.
* The RS-232C protocol is used for communication
between the PC and product. You can
turn the product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C
Cable
(not
included)
PC
monitor
1
monitor
2
monitor
3
monitor
4
@
Communication
Parameter
•
Baud Rate : 9600bps (UART)
•
Data Length : 8bits
•
Parity Bit : None
• Stop Bit : 1bit
•
Flow Control : None
• Communication Code : ASCII code
@