LG M4210C-BA User Guide - Page 43
Transmission, Receiving, Protocol
UPC - 719192183568
View all LG M4210C-BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
@ Transmission / Receiving Protocol Transmission I [Commandl][Command2][ ][Set ID][ ][Data][Cr] I * [Command 1]: First command. (j, k, m, d) * [Command 2]: Second command. * [Set ID]: Set up the Set ID number of product. range • 1-99. by setting '0', server can control all products. * In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack message. Because all sets will send the ack message, so it's impossible the check the whole ack messages. * [DATA]: To transmit command data. Transmit 'FF' data to read status of command. * [Cr]: Carriage Return ASCII code '0x0D' * [ ]: ASCII code Space (0x20)' OK Acknowledgement I [Command2][ ][Set ID][ ][OK][Data][x] I * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement I [Command2][ ][Set ID][ ][NG][Data][x] * If there is error, it returns NG @