LG PA77U Owners Manual - Page 115

Connecting a Digital Amp

Page 115 highlights

CONNECTING DEVICES 115 Connecting a Digital Amp NOTE yyAlso, refer to the user manual of the audio device to connect. Using an optical cable, connect the yyWhen connecting this product to digital audio input port of a digital amp other devices, make sure to turn off to the OPTICAL DIGITAL AUDIO OUT and unplug all the devices. port of the projector. The output of an yyThe audio output of this product amp with a digital converter must be set has wide-ranging audio bandwidth, to the desired audio format. When using so the receiver volume must be a HDMI cable to connect a home theater adjusted properly. or when connecting an optical output Speakers can be damaged by to an external audio device, set Sound unexpected high frequencies. Out to External Speaker (Optical/HDMI yyConnecting the OPTICAL DIGITAL ARC) as shown below. If a projector, AUDIO OUT port of the projector home theater, or the speaker of an to the digital audio input port of a external audio device is operating at the digital amp and the audio input port same time, there will be an echo. of the projector to the analog audio output port of the digital amp can CH VOL - S CH VOL + 237,&$/ 237,&$/ ',*,7$/ /$1 ',*,7$/ $8',2287 &20321(17 $9,1 ,1 $17(11$,1 /$1 '&,1 $8',2287 cause sound oscillation due to the &20321(17 $9,1 ,1 c$1lo7(s1e1$d,1loop. Remove one of the two connections to prevent this. '&(,T1 his also applies to home theater devices.) * O ptional Extras

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

115
CONNECTING DEVICES
Connecting a Digital
Amp
Using an optical cable, connect the
digital audio input port of a digital amp
to the
OPTICAL DIGITAL AUDIO OUT
port of the projector. The output of an
amp with a digital converter must be set
to the desired audio format. When using
a HDMI cable to connect a home theater
or when connecting an optical output
to an external audio device, set
Sound
Out
to
External Speaker (Optical/HDMI
ARC)
as shown below. If a projector,
home theater, or the speaker of an
external audio device is operating at the
same time, there will be an echo.
S
VOL -
VOL +
CH
CH
NOTE
y
Also, refer to the user manual of the
audio device to connect.
y
When connecting this product to
other devices, make sure to turn off
and unplug all the devices.
y
The audio output of this product
has wide-ranging audio bandwidth,
so the receiver volume must be
adjusted properly.
Speakers can be damaged by
unexpected high frequencies.
y
Connecting the
OPTICAL DIGITAL
AUDIO OUT
port of the projector
to the digital audio input port of a
digital amp and the audio input port
of the projector to the analog audio
output port of the digital amp can
cause sound oscillation due to the
closed loop. Remove one of the two
connections to prevent this.
(This also applies to home theater
devices.)
* Optional
Extras