LG REG-123A Service Manual - Page 12
Room Air Conditioner, Installation
View all LG REG-123A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation 3. Loosely assemble the sill support using the parts in Figure 4. 4. Select the position that will place the sill support near the outer most point on sill (See Figure 4) NOTICE Be careful when you install the cabinet (Frame Guides are broken easily). 5. Attach the sill support to the cabinet track hole in relation to the selected position using 2 Type A screws in each support (See Figure 5). 6. The cabinet should be installed with a very slight tilt (about 1/2") downward toward the outside (See Figure 6). Adjust the bolt and the nut of Sill Support for balancing the cabinet. 7. Attach the cabinet to the window stool by driving the screws (Type B) through the front angle into window stool (5/8"). 8. Pull each Frame Curtain properly to each window sash track, and repeat step 2. INDOOR Bolt 3 OUTDOOR Sill Support 2 Nut 4 Figure 4 12 Frame Guide 5 Screw(Type A) About 1/2" INDOOR Cabinet OUTDOOR Figure 5 Screw(Type B) 6 Screw(Type A) 5 About 1/2" Sill support 2 Sash track Sill support 2 Front Angle Screw(Type B) 6 Figure 6 9. Attach each Frame Curtain to the window sash by using screws (Type C).(See Figure 7) 12 Room Air Conditioner Type C 7 Figure 7