LG WM2455HG Owner's Manual (English) - Page 15
Maintenance - drain pump
UPC - 048231009171
View all LG WM2455HG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CARE AND CLEANING MAINTENANCE Cleaning the Water Inlet Filters If the washer detects that water is not entering the dispenser, an error message will show on the display. If you live in an area with hard water, this may be caused by clogged inlet filters. IMPORTANT: Use extreme care when removing and cleaning the filters. If the filters cannot be cleaned or are damaged, do NOT operate the washer without the inlet filters. Contact LG Customer Service or a qualified LG servicer. IMPORTANT: Use ONLY the inlet hoses provided by LG with this laundry product. Aftermarket hoses are not guaranteed to fit or function correctly. Other hoses may not tighten correctly and could cause leaks. Subsequent damage to product or property will not be covered under the terms of LG's warranty. 1 Turn off both water taps completely. Unscrew the hot and cold water lines from the back of the washer. Inlet Filter 2 Carefully remove the filters from the water inlets, and soak them in white vinegar or a lime scale remover, following the manufacturer's instructions. Rinse thoroughly before reinstalling. Press the filters back into place and reattach the water lines. Do NOT operate the washer without the inlet filters. 28 MFL31245113_ENG.indd 28-29 CARE AND CLEANING MAINTENANCE (cont.) Cleaning the Drain Pump Filter Lint and other objects may accumulate and clog the drain pump filter. If the washer fails to drain properly, unplug the washer and allow the water to cool, if necessary, before proceeding. 1 Open the drain pump filter access panel. Drain Hose 2 Unclip the drain hose and pull it out. Place the end of the drain hose in a pan, bucket, or floor drain to catch water. Plug Pump Filter 3 Remove the plug from the drain hose, and allow the water to drain completely. Twist the pump filter counterclockwise to remove. Remove any lint and foreign objects from the pump filter. Reverse the above steps to reinstall the drain pump filter and drain hose. Be sure to close the cover panel when finished. 29 2007.10.4 2:32:0 PM