Lenovo E100 Hardware Maintenance Manual - Page 101
Notes
View all Lenovo E100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
10. Lift the small handle 3 and open the retainer 1 . 11. Lift the microprocessor 2 straight up and out of the system board socket. Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the notches on the microprocessor. This is important when reinstalling the microprocessor on the new system board. This is important when reinstalling the microprocessor on the new system board. c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 12. On the new system board, release the lever securing the microprocessor retainer and then pivot the retainer until it is fully open. Note: There will be a black plastic cover on the microprocessor retainer to protect the socket on the new system board. Remove the black plastic cover and place it on the microprocessor socket of the failing system board when you complete this procedure. Chapter 8. Replacing FRUs (Type 9626) 95