Lenovo E100 Hardware Maintenance Manual - Page 105

Replacing, optical, drive

Get Lenovo E100 PDF manuals and user guides View all Lenovo E100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 105 highlights

Replacing an optical drive 1. Remove the left-side and right-side covers. See "Removing the covers" on page 86. 2. Disconnect the power cable and signal cable from the optical drive. 3. Remove the front bezel by removing the two screws and releasing the six plastic tabs inside the chassis and then completely remove the bezel. Feed the power LED cable through the front chassis opening as the bezel is removed. Note: Be careful so that you do not break the power LED cable, because the cable is attached to the bezel assembly. 4. Remove the metal shield from the drive bay by inserting a flat-blade screwdriver into one of the slots and gently prying it loose. Chapter 8. Replacing FRUs (Type 9626) 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Replacing
an
optical
drive
1.
Remove
the
left-side
and
right-side
covers.
See
“Removing
the
covers”
on
page
86.
2.
Disconnect
the
power
cable
and
signal
cable
from
the
optical
drive.
3.
Remove
the
front
bezel
by
removing
the
two
screws
and
releasing
the
six
plastic
tabs
inside
the
chassis
and
then
completely
remove
the
bezel.
Feed
the
power
LED
cable
through
the
front
chassis
opening
as
the
bezel
is
removed.
Note:
Be
careful
so
that
you
do
not
break
the
power
LED
cable,
because
the
cable
is
attached
to
the
bezel
assembly.
4.
Remove
the
metal
shield
from
the
drive
bay
by
inserting
a
flat-blade
screwdriver
into
one
of
the
slots
and
gently
prying
it
loose.
Chapter
8.
Replacing
FRUs
(Type
9626)
99