Lenovo IdeaCentre K330 Lenovo IdeaCentre K3 Series Hardware Replacement Guide - Page 23
Replacing the heat sink assembly
View all Lenovo IdeaCentre K330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Replacing the heat sink assembly Attention: Do not remove the computer cover or attempt any repair before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at: http://consumersupport.lenovo.com To replace the heat sink assembly: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Lay the computer on its side. 3. Locate the heat sink. Refer to "Identifying parts on the system board". 4. Disconnect the heat sink and the fan assembly cable from the system board. 5. Remove the four screws that secure the heat sink and fan assembly to the system board. 1 1 6. Lift the defective heat sink and fan assembly away from the system board. 20 Hardware Replacement Guide