Lenovo IdeaTab S1209A Lenovo IdeaTab S2109A-F Hardware Maintenance Manual - Page 36

System board, Important notices for handling the system board

Get Lenovo IdeaTab S1209A PDF manuals and user guides View all Lenovo IdeaTab S1209A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Lenovo IdeaTab S2109A-F Hardware Maintenance Manual 1030 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board. • If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: •• "1010 Base cover" on page 27 •• "1020 Battery pack" on page 31 Figure 3. Removal steps of system board Remove the ten screws 1. 1 1 1 1 1 1 1 1 1 1 Step 1 Screw (quantity) Color M3.6 x 2.2 mm, flat-head, nylon-coated (10) Black Torque 0.8-1.0 kg/cm 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
32
Lenovo IdeaTab S2109A-F Hardware Maintenance Manual
1030
System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
•
In the whole process, make sure not to drop or stack the system board.
•
If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
•
“1010 Base cover” on page 27
•
“1020 Battery pack” on page 31
Figure 3. Removal steps of system board
Remove the ten screws
1
.
1
1
1
1
1
1
1
1
1
1
Step
Screw (quantity)
Color
Torque
1
M3.6 x 2.2 mm, flat-head, nylon-coated (10)
Black
0.8-1.0 kg/cm