Lenovo K49 Hardware Maintenance Manual - Page 74
Removal steps of LCD unit, When installing
View all Lenovo K49 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removal steps of LCD unit Release the antenna cables from the cable guides. Then remove the screws 1 . 1 1 1 1 Step 1 Screw (quantity) M2.5 × 6 mm, flat-head, nylon-coated (4) Color Black Torque 1.6 kgf-cm When installing: • Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subject to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. • Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides. 68 Hardware Maintenance Manual
Removal steps of LCD unit
Release the antenna cables from the cable guides. Then remove the screws
1
.
1
1
1
1
Step
Screw (quantity)
Color
Torque
1
M2.5 × 6 mm, flat-head, nylon-coated (4)
Black
1.6 kgf-cm
When installing:
•
Route the antenna cables along the cable guides. As you route the cables, make sure that they are not
subject to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to
be broken.
•
Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna
cables when you attach the LCD assembly. Route the LCD cable along the cable guides.
68
Hardware Maintenance Manual