Lenovo NetVista A40p Hardware Maintenance Manual for NetVista 6018, 6058, 6059 - Page 26
If a component is called out, make sure it is, IDE signal cable
View all Lenovo NetVista A40p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Diagnostic Error Code FRU/Action 020-197-XXXPCI test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 020-198-XXXPCI test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 020-199-XXXPCI test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 020-262-XXX PCI system error 1. PCI card 2. Riser card, if installed 3. System board 025-000-XXX IDE interface Test Passed 1. No action 025-00X-XXX 025-01X-XXXIDE interface failure 1. IDE signal cable 2. Check power supply 3. IDE device 4. System board 025-027-XXXIDE interface Configuration/Setup 1. IDE signal cable error 2. Flash the system 3. IDE device 4. System board 025-02X-XXX 025-03X-XXX 025-04X-XXXIDE Interface failure 1. IDE signal cable 2. Check power supply 3. IDE device 4. System board 025-195-XXXIDE interface Test aborted by user 1. Information 2. Re-start the test, if necessary 025-196-XXXIDE interface test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 12 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649