Lenovo NetVista A40p Hardware Maintenance Manual for NetVista 6018, 6058, 6059 - Page 88
Make sure Asset Care and Asset ID are, Run Setup. Check Stepping level for
View all Lenovo NetVista A40p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
POST Error Code 164POST detected a base memory or extended memory size mismatch error or RIMM socket 3 is populated with a RIMM memory module 166Boot Block Check Sum Error 167Microprocessor installed that is not supported by the current POST/BIOS 168Alert on LAN error 17X, 18X 175 176 177Corrupted Administrator Password 178 183 184No RFID Antenna 185Corrupted boot sequence 186 187 FRU/Action 1. Run Setup. Check System Summary menu for memory size change. (See "Setup Utility program" on page 41.) 2. Run the Extended Memory Diagnostic tests 1. Run Flash Recovery using Boot Block. See "Flash recovery boot block jumper" on page 50. 2. System Board 1. Run Setup. Check Stepping level for the BIOS level needed, then perform the flash update. 2. Processor 1. Run Setup. Check to see that Ethernet and Alert on LAN are enabled. 2. System Board 3. Riser card 1. C2 Security 1. Run Configuration. See "Setup Utility program" on page 41. 2. System Board 1. Covers were removed from the computer 1. System Board 1. System Board 1. Enter the administrator password 1. Make sure Asset Care and Asset ID are enabled in Configuration/Setup 2. RFID Antenna 3. System Board 4. Riser card 1. Set configuration and reinstall the boot sequence 1. System Board 1. Clear Administration password 2. System Board 74 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649