Lenovo ThinkCentre M57 Hardware Maintenance Manual - Page 61

Diagnostic Error Code 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error FRU/Action 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 494 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 494 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, "Using the Setup Utility," on page 49 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, "Using the Setup Utility," on page 49 2. Flash the system and retest. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 494 3. Go to "Undetermined problems" on page 80 1. Go to "Undetermined problems" on page 80 2. Flash the system and re-test 3. Replace component under function test 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 494 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a CD-ROM or diskette" on page 494 2. System board No action System board System board Chapter 7. Symptom-to-FRU Index 55