Home » Lenovo Manuals » Desktops » Lenovo ThinkCentre M57 » Manual Viewer

Lenovo ThinkCentre M57 Hardware Maintenance Manual - Page 141

Replacing, secondary, drive

View all Lenovo ThinkCentre M57 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 141 highlights

Replacing the secondary hard disk drive This procedure provides instructions on how to replace the secondary hard disk drive. Important When a new hard disk drive is installed, a set of Product Recovery discs might be required. The set of Product Recovery discs enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory. For more information on recovering factory-installed software, refer to ″Recovering Software″ in the User Guide. To replace the secondary hard disk drive: 1. Remove the computer cover. See "Removing the cover" on page 117. 2. Locate the secondary hard disk drive 5 . 3. Disconnect the signal and power cables from the hard disk drive. 4. Press the blue release button to release the hard drive cage from the chassis. Chapter 9. Replacing FRUs - Tower Computers 135

Section	Page
Contents	5
Chapter 1. About this manual	7
Important Safety Information	7
Important information about replacing RoHS compliant FRUs	8
Chapter 2. Safety information	9
General safety	9
Electrical safety	9
Voltage-selection switch	11
Safety inspection guide	11
Handling electrostatic discharge-sensitive devices	12
Grounding requirements	13
Safety notices (multi-lingual translations)	13
Chapter 3. General information	45
The ThinkVantage™ Productivity Center program	45
Additional information resources	45
Specifications	46
Types 6008, 6068, 6074, 9012, 9018, 9087, 9163, 9172, and 9193	47
Types 6010, 6069, 6075, 6081, 6086, 9013, 9019, 9088, 9160, 9164, 9174, 9194, 9304, 9323, 9326, 9978, and 9979	48
Chapter 4. General Checkout	49
Problem determination tips	49
Chapter 5. Diagnostics	51
PC-Doctor for Windows	51
PC-Doctor for Windows PE	51
Running diagnostics from the Rescue and Recovery workspace	51
PC-Doctor for DOS	52
Creating a diagnostic CD image	52
Creating diagnostic diskettes	52
Running diagnostics from the CD or diskettes	53
Navigating through the diagnostics programs	53
Running tests	53
Test results	54
Quick and Full erase - hard drive	54
Viewing the test log	55
Chapter 6. Using the Setup Utility	57
Starting the Setup Utility program	57
Viewing and changing settings	57
Using passwords	57
Password considerations	57
User Password	58
Administrator Password	58
Setting, changing, and deleting a password	58
Selecting a startup device	58
Selecting a temporary startup device	58
Selecting or changing the startup device sequence	59
Advanced settings	59
Exiting from the Setup Utility program	59
Chapter 7. Symptom-to-FRU Index	61
Hard disk drive boot error	61
Power Supply Problems	61
Diagnostic error codes	62
Beep symptoms	84
POST error codes	85
Miscellaneous error messages	87
Undetermined problems	88
Chapter 8. Replacing FRUs (Types 6008, 6068, 6074, 9012, 9018, 9087, 9163, 9172, and 9193)	91
Locations	92
Rear connectors	92
Computer components	93
System board connectors	94
Removing the cover	95
Accessing system board components and drives	96
Replacing a memory module	98
Replacing the CMOS battery	99
Replacing the power supply	100
Replacing the system board	102
Replacing the microprocessor	106
Replacing the hard disk drive	110
Replacing an optical drive	112
Replacing the diskette drive	113
Replacing the power switch/LED assembly	114
Replacing the front panel card	115
Replacing the system fan assembly	116
Replacing a PCI adapter	117
Completing the FRU replacement	118
Chapter 9. Replacing FRUs (Types 6010, 6069, 6075, 6081, 6086, 9013, 9019, 9088, 9160, 9164, 9174, 9194, 9304, 9323, 9326, 9978, and 9979)	119
Locations	120
Rear connectors	120
Computer components	121
System board connectors	122
Removing the cover	123
Removing and replacing the front bezel	124
Replacing the power supply	125
Replacing the system board	126
Replacing the microprocessor	131
Replacing a memory module	135
Replacing a PCI adapter	136
Replacing the primary hard disk drive	138
Replacing the secondary hard disk drive	141
Replacing an optical drive	145
Replacing the diskette drive	146
Replacing the rear fan assembly	147
Replacing the front fan assembly	149
Replacing the front audio/USB assembly	151
Replacing the power switch/LED assembly	152
Replacing the CMOS battery	153
Completing the FRU replacement	154
Chapter 10. FRU lists	155
Machine Type 6008	155
Machine Type 6010	166
Machine Type 6068	178
Machine Type 6069	188
Machine Type 6074	199
Machine Type 6075	210
Machine Type 6081	226
Machine Type 6086	237
Machine Type 9012	249
Machine Type 9013	258
Machine Type 9018	268
Machine Type 9019	278
Machine Type 9087	288
Machine Type 9088	298
Machine Type 9160	312
Machine Type 9163	323
Machine Type 9164	335
Machine Type 9172	345
Machine Type 9174	355
Machine Type 9193	366
Machine Type 9194	377
Machine Type 9304	387
Machine Type 9323	399
Machine Type 9326	410
Machine Type 9978	422
Machine Type 9979	434
Chapter 11. Additional Service Information	447
Security features	447
Hardware controlled Passwords	447
Operating system password	447
Vital product data	447
BIOS levels	447
Updating (flashing) BIOS from a CD-ROM or diskette	448
Recovering from a POST/BIOS update failure	448
Power management	449
Automatic configuration and power interface (ACPI) BIOS	449
Automatic Power-On features	449
Appendix. Notices	451
Television output notice	452

Match case Limit results 1 per page

Replacing

the

secondary

hard

disk

drive

This

procedure

provides

instructions

how

replace

the

secondary

hard

disk

drive.

Important

When

new

hard

disk

drive

installed,

set

Product

Recovery

discs

might

required.

The

set

Product

Recovery

discs

enable

the

contents

the

hard

disk

restored

the

same

state

when

the

computer

was

originally

shipped

from

the

factory.

For

information

recovering

factory-installed

software,

refer

″

Recovering

Software

″

the

User

Guide

replace

the

secondary

hard

disk

drive:

Remove

the

computer

cover.

See

“Removing

the

cover”

page

117.

Locate

the

secondary

hard

disk

drive

±5²

Disconnect

the

signal

and

power

cables

from

the

hard

disk

drive.

Press

the

blue

release

button

release

the

hard

drive

cage

from

the

chassis.

Chapter

Replacing

FRUs

Tower

Computers

135