Lenovo ThinkCentre M57 Hardware Maintenance Manual - Page 149
Replacing, front, assembly
View all Lenovo ThinkCentre M57 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Replacing the front fan assembly This procedure describes how to remove and replace the front fan assembly. 1. Remove the computer cover. See "Removing the cover" on page 117. 2. Remove the front bezel. See "Removing and replacing the front bezel" on page 118. 3. Note the routing of the front fan cable to the system board. Disconnect the front fan assembly cable from the system board. See "System board connectors" on page 116. 4. The fan assembly is mounted with four rubber mounts that protrude through the front of the chassis. Remove the fan assembly by pulling the rubber mounts back through the chassis. 5. Install the new front fan assembly by aligning the rubber mounts of the front fan assembly with the holes on the chassis and push the rubber mounts through the holes. Chapter 9. Replacing FRUs - Tower Computers 143