Lenovo ThinkCentre M92z White Paper for ThinkCentre M92, M92p, M92z - Page 28

Note: You can refer to detailed configuration examples for both manual setup and configuration mode and automatic setup and configuration mode in Appendix A "Examples of configuring Intel AMT in manual and automatic setup and configuration modes" on page 23 Logging on to the client The client can be accessed from a management console on the network that has a supported Web browser. 1. Open a Web browser on the management console and type one of the following in the address box: • For manual setup and configuration mode: http://IP_Address:16992 (for example,http://192.168.1.13:16992) • For automatic setup and configuration mode (for TLS): https://IP_Address:16993(for example, https://192.168.1.13:16993) 2. Click Log On in the Intel Active Management Technology window. 3. In the Enter Network Password window, enter your username and password and then click OK. You will go to the client Web user interface. Functions in the Web user interface The Web user interface enables you to perform the following tasks: • View the system status • View the hardware information of your AMT computer, including system, processor, memory, and hard disk drive • View, start, stop, and clear event logs • Remote power control, including: turn the computer off, cycle power off and on, reset, normal startup, start the computer from a local optical drive, and start the computer from a local hard disk drive • View and manage the Intel AMT power policies • View and manage the Intel AMT network settings • View and manage the Intel AMT IPv6 network settings • View and manage the Intel AMT system name settings • View and manage the Intel AMT user accounts 20 ThinkCentre M92/p and M92z Intel Active Management TechnologyConfiguration Guide