Lenovo ThinkPad 600E TP 600E On-line User's Guide that was provided with the s - Page 159
Installing the ThinkPad Configuration Program for OS/2
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
After OS/2 has been successfully installed, restart the computer. Installing the ThinkPad Configuration Program for OS/2 To install the ThinkPad Configuration program for OS/2: 1 Start OS/2; then insert the Utility Diskette for OS/2 into the diskette drive. 2 Install the ThinkPad System Management device driver: a Open OS/2 System, System Setup, and then Install/Remove. b Click on Device Driver Install and click on the Install... button. c Click on ThinkPad System Management Device Driver; then click on OK. 3 Open the OS/2 screen command prompt. 4 Type A:\INSTALL2 and press Enter. Follow the instructions on the screen. Installing the PC Card Support Software for OS/2 To use PC Cards, you need to install the following device drivers and software associated with PC Cards: PC Card support program (PC Card Director): - Card Services device driver - Socket Services device driver - PC Card Power Management device driver - PC Card Director utility PC Card client device drivers (only when PC Card Director does not support the PC Card) To install the PC Card support software for OS/2: 1 Start OS/2; then open the OS/2 full-screen command prompt. Chapter 8. Installing Software 151