Lenovo ThinkPad 600E TP 600E On-line User's Guide that was provided with the s - Page 178
Enabling or Disabling a Flash (POST/BIOS) Update from the Network, Reset, CONFIG, Network, Enable
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
4 Define a sequence by clicking on the devices in the order you want them to start. The devices you choose appear in boxes 1 to 4. 5 Click on OK. Note: If you want to change the settings, click on Reset and make the settings again. Enabling or Disabling a Flash (POST/BIOS) Update from the Network When a Flash (POST/BIOS) update from the network is enabled, the system programs in your computer can be updated remotely by a network administrator from a management console. The following requirements must be met, however: Update Flash from network must also be enabled. (See the following steps.) Your computer must be started over the LAN. Your computer must be engaged in a remote program load. Network-management software is required in the remote administrator's computer. To enable or disable the Flash (POST/BIOS) update from the network setting, do the following: 1 Go to the Easy-Setup menu. 2 Click on the CONFIG icon. The "Configuration" window appears. 3 Click on the Network icon. The "Network" window appears. 4 Select either the Enable or the Disable button beside "Flash." 5 Click on OK. 170 IBM ThinkPad 600E Online Book