Lenovo ThinkPad 600E TP 600E On-line User's Guide that was provided with the s - Page 161
Installing the Infrared Device Driver for OS/2, Installing the Display Driver for OS/2, A:\INSTALL
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
3 Go to the OS/2 command prompt. Type A:\INSTALL and press Enter. Follow the instructions on the screen. 4 If you are prompted for a location to install the files, select the drive where OS/2 is installed. 5 Remove the TrackPoint Driver Diskette for OS/2 from the diskette drive, and restart your computer to make the new settings effective. Installing the Infrared Device Driver for OS/2 To install the infrared device driver for OS/2: 1 Start OS/2. 2 Go to the OS/2 command prompt and install the Infrared Features Diskette II into the diskette drive. 3 Type as follows and press Enter. A:\INSTALL2 /S:A:\ /T:x:tgt_dir /B:y where x is the target drive, tgt_dir is the target directory, and y is the boot drive where CONFIG.SYS resides. Installing the Display Driver for OS/2 The display driver enables you to use various screen resolutions and colors for the LCD and external monitor. The display driver also takes advantage of the computer's video capability. To install the ThinkPad display driver for OS/2: 1 Start OS/2. 2 Insert the Video Features Diskette (NM2200) for OS/2 into the diskette drive: 3 Open the OS/2 full screen or OS/2 window and go to the A: prompt. | 4 Type SETUP X (X=boot drive) and press Enter. Chapter 8. Installing Software 153