Lenovo ThinkPad 770Z ThinkPad 770 User's Guide - Page 83

FDD-1, Reset, Network, Enter, The Speed menu

Get Lenovo ThinkPad 770Z PDF manuals and user guides View all Lenovo ThinkPad 770Z manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Title: C79DMMST CreationDate: 07/16/97 13:09:22 in the docking station, that diskette drive becomes FDD-1. If you have an additional diskette drive, that drive becomes FDD-2. The hard disk drive in your computer is HDD-1. If you have a hard disk drive in the UltraBay II, that drive becomes HDD-2. The HDD-3 and HDD-4 are the external hard disk drives on the docking station. 4 Move the cursor to the Reset icon; and click on it. 5 Select the first device you want for the startup sequence; then click on it. The device moves up to box 1. You cannot set a hard disk drive before a PCMCIA** card. 6 If you are using a remote program loading (RPL) system through a token-ring card or some other network card, do the following: a Select Network and click on it. The "Speed" menu appears. b If you are using a token-ring card, select the speed you want (4 or 16), and click on it; then press Enter. If you are using a network card other than a token-ring card, such as an Ethernet card, you need not specify the RPL speed. Press Esc and exit this menu. 7 Repeat these steps for the other devices. You can set up to four devices. 8 Click on OK or press Enter to save the changes. Chapter 2. Fine-Tuning Your Computer 2-59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
in the docking station, that diskette drive becomes
FDD-1
. If
you have an additional diskette drive, that drive becomes
FDD-2
.
The hard disk drive in your computer is
HDD-1
.
If you have a
hard disk drive in the UltraBay II, that drive becomes
HDD-2
.
The
HDD-3
and
HDD-4
are the external hard disk drives on the
docking station.
4
Move the cursor to the
Reset
icon; and click on it.
5
Select the first device you want for the startup sequence; then
click on it.
The device moves up to box
1
.
You cannot set a hard disk
drive before a PCMCIA** card.
6
If you are using a remote program loading (RPL) system
through a token-ring card or some other network card, do the
following:
a
Select
Network
and click on it.
The “Speed” menu
appears.
b
If you are using a token-ring card, select the speed you
want (
4
or
16
), and click on it; then press
Enter
.
If you are using a network card other than a token-ring
card, such as an Ethernet card, you need not specify the
RPL speed.
Press
Esc
and exit this menu.
7
Repeat these steps for the other devices.
You can set up to
four devices.
8
Click on
OK
or press
Enter
to save the changes.
Chapter 2.
Fine-Tuning Your Computer
2-59
Title: C79DMMST CreationDate: 07/16/97 13:09:22