Lenovo ThinkPad R400 Hardware Maintenance Manual - Page 129
Attention, its position as shown in
View all Lenovo ThinkPad R400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Table 26. Removal steps of base cover, USB sub card with cable, and PC Card/ExpressCard slots (or ExpressCard/Smart Card slots or ExpressCard/7-in-1 Media Card Reader slots) bezel assembly (continued) Attention: Before step 8 , be sure that the Serial Ultrabay Slim device or Serial Ultrabay Enhanced device eject lever has not popped out. It must be housed in its position as shown in the figure a . 7 8 b a Note: When installing the base cover, make sure that the position of the wireless switch, and firmly fit into the frame b . Removing and replacing a FRU 121
Table 26. Removal steps of base cover, USB sub card with cable, and PC Card/ExpressCard
slots (or ExpressCard/Smart Card slots or ExpressCard/7-in-1 Media Card Reader slots)
bezel assembly (continued)
Attention:
Before step
±8²
, be sure that the Serial Ultrabay Slim device or Serial
Ultrabay Enhanced device eject lever has not popped out. It must be housed in
its position as shown in the figure
±a²
.
a
b
7
8
Note:
When installing the base cover, make sure that the position of the wireless
switch, and firmly fit into the frame
±b²
.
Removing and replacing a FRU
121