Lexmark 2030 Color Jetprinter Service Manual - Page 27

Carrier Transport Motor Removal, DC/DC Converter Removal, Drive Train Assembly Removal

Get Lexmark 2030 Color Jetprinter PDF manuals and user guides View all Lexmark 2030 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

4091-001 Carrier Transport Motor Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Disconnect the carrier transport motor connector from the system board. 4. Remove the belt from the carrier transport motor pulley. 5. Remove the two screws securing the carrier transport motor to the carrier frame and remove the motor. Note the routing of the motor cable. 6. See the Note in the "" on page 2-10. DC/DC Converter Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Disconnect the DC/DC converter connector from the system board. 4. Remove the screw that secures the DC/DC converter to the carrier frame on the right side. 5. Push down on the latch at the left rear of the DC/DC converter and slide it off the base. Drive Train Assembly Removal 1. Remove the front cover. 2. Remove the rear cover. 3. Remove the sheet feeder. 4. Unplug the paper feed motor assembly. Note the routing of the motor cable. 5. Remove the two screws securing the drive train to the carrier frame. 6. Push the drive train to the left and remove it from the carrier frame. Repair Information 4-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Repair Information 4-5
4091-001
Carrier Transport Motor Removal
1. Remove the front cover.
2. Remove the rear cover.
3. Disconnect the carrier transport motor connector from the
system board.
4. Remove the belt from the carrier transport motor pulley.
5. Remove the two screws securing the carrier transport motor to
the carrier frame and remove the motor. Note the routing of the
motor cable.
6. See the
Note
in the
“” on page 2-10
.
DC/DC Converter Removal
1. Remove the front cover.
2. Remove the rear cover.
3. Disconnect the DC/DC converter connector from the system
board.
4. Remove the screw that secures the DC/DC converter to the
carrier frame on the right side.
5. Push down on the latch at the left rear of the DC/DC converter
and slide it off the base.
Drive Train Assembly Removal
1. Remove the front cover.
2. Remove the rear cover.
3. Remove the sheet feeder.
4. Unplug the paper feed motor assembly. Note the routing of the
motor cable.
5. Remove the two screws securing the drive train to the carrier
frame.
6. Push the drive train to the left and remove it from the carrier
frame.