Lexmark 935dtn User's Guide - Page 115
Serial <x>, Some held jobs were not restored, Standard Bin Full, Staples <x> empty or misfed
UPC - 734646023535
View all Lexmark 935dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored. Serial The printer is using a serial cable connection. The serial port is the active communication link. Some held jobs were not restored Press until Continue appears, and then press to delete the specified job. Some held jobs will not be restored • Press until Continue appears, and then press to clear the message and resume printing. • Cancel the current job. Standard Bin Full Remove the stack of paper from the standard exit bin to clear the message. Staples empty or misfed Load the specified staple cartridge into the finisher to clear the message and continue stapling. Staples low or missing Load the specified staple cartridge in the finisher to clear the message. Submitting Selection Wait for the message to clear. Tray Empty Load paper in the tray to clear the message. Tray Low Load paper in the specified tray to clear the message. Tray Missing Insert the specified tray into the printer. USB/USB The printer is using a USB cable connection. The USB port is the active communication link. Waiting The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current print job. 115