Lexmark C510 Setup Guide

Lexmark C510 Manual

Get Lexmark C510 PDF manuals and user guides View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C510 manual content summary:

  • Lexmark C510 | Setup Guide - Page 1
    C510 Setup Guide December 2003 www.lexmark.com
  • Lexmark C510 | Setup Guide - Page 2
    designation of a set of printer commands (language) and functions included in its software products. This printer is intended to be instructions, to a professional service person. • This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark
  • Lexmark C510 | Setup Guide - Page 3
    ready for setup 4 Step 2: Install printer supplies 6 Installing toner cartridges 6 Installing the photodeveloper cartridge 9 Step 3: Position the optional drawer 11 Step 4: Prepare the printer 12 Positioning the printer 12 Securing the drawer to the printer 13 Attaching an operator panel
  • Lexmark C510 | Setup Guide - Page 4
    page 45 Printing Quick Reference information 45 Step 11: Configure for TCP/IP 47 Assigning a printer IP address 47 Verifying the IP settings 48 Configuring for Pull Printing 48 Step 12: Install drivers for network printing 49 Windows 49 Macintosh 53 UNIX/Linux 55 NetWare 56 Contents iii
  • Lexmark C510 | Setup Guide - Page 5
    Step 13: Using the publications CD 57 Viewing the CD contents 57 Distributing the information 58 Storing Quick Reference information 58 Statement of Limited Warranty 59 Contents iv
  • Lexmark C510 | Setup Guide - Page 6
    Page 4 Optional duplex unit Page 17 Your printer is available in three models: • Lexmark C510, with 64MB of standard memory, one 250-sheet tray, and USB and parallel connectors. • Lexmark C510n, which has 128MB of standard memory, as well as an Ethernet 10BaseT/ 100BaseTX print server installed
  • Lexmark C510 | Setup Guide - Page 7
    also available on our Lexmark Web site at www.lexmark.com/publications. Information pages • Help Guide • Printing Guide • Jam Clearance Information pages are stored inside the printer. They provide information about loading print media, diagnosing and solving print problems, and clearing jams from
  • Lexmark C510 | Setup Guide - Page 8
    CD that shipped with your printer. The drivers CD contains all the necessary files to get your printer up and running. It may also contain printer utilities, screen fonts, and additional documentation. Visit our Web site at www.lexmark.com for updated printer drivers, utilities, and other
  • Lexmark C510 | Setup Guide - Page 9
    Getting ready for setup 20 cm (8 in.) 58.5 cm (23 in.) Select a well ventilated location for your printer that provides room for the trays, cover, and doors. Choose a firm, level surface away from direct airflow (25.1 in.) 35 cm (14 in.) Both 73.5 cm (29 in.) 35 cm (14 in.) Unpack the printer 4
  • Lexmark C510 | Setup Guide - Page 10
    Power cord • Photodeveloper cartridge • Print cartridges (four, shipped inside printer, wrapped in packaging) • Setup Guide with a publications CD and Quick Reference sheet • Drivers CD • Operator panel overlay (non-English only) If any items are missing or damaged, refer to our Lexmark Web site at
  • Lexmark C510 | Setup Guide - Page 11
    Step 2: Install printer supplies Installing toner cartridges Packaging Follow the instructions in this section to prepare the toner cartridges. 1 Pull the front door release latch forward and gently lower the front door. 2 Remove the packaging. 3 Grasp one of the toner cartridges by the handle
  • Lexmark C510 | Setup Guide - Page 12
    4 Hold the cartridge level, and gently shake it to distribute the toner. 5 Remove the tape and cover from the cartridge. Install printer supplies 7
  • Lexmark C510 | Setup Guide - Page 13
    the cartridge with the appropriate slot and slide the cartridge in. Toner cartridges must remain in their original order; they are not interchangeable in the slots. 8 Repeat step 3 on page 6 through step 7 on page 8 to set up the other cartridges. 9 Close the front door. Install printer supplies
  • Lexmark C510 | Setup Guide - Page 14
    Installing the photodeveloper cartridge Follow the instructions in this section to install the photodeveloper cartridge. 1 Open the printer top door. Warning: The photodeveloper is very delicate. To avoid damaging it, do not remove its packaging until you are ready to install it. 2 Carefully
  • Lexmark C510 | Setup Guide - Page 15
    : Do not touch the shiny photoconductor film on the photodeveloper cartridge. 3 Grasp the cartridge by the handle and align it with its opening. Gently lower it into place. 4 Push the latches away from each other to lock the cartridge into place. 5 Close the top door. Install printer supplies 10
  • Lexmark C510 | Setup Guide - Page 16
    the tray. 4 Move the support unit to the location selected for the printer. 5 Tip the tray slightly and push it fully into the support unit. Note: When you add or remove the optional drawer, remember to update the printer configuration through your printer driver. Position the optional drawer 11
  • Lexmark C510 | Setup Guide - Page 17
    people to lift it safely. Once you have selected a location and positioned an optional drawer (if you have one), you are ready to position the printer. Lift the printer by the recessed handholds on both sides, and place it on the table or optional drawer. To position the
  • Lexmark C510 | Setup Guide - Page 18
    the hole on the right side of the printer as shown. Press the bracket flat against the printer, and then tighten the thumbscrew. Bracket Tighten thumbscrew 2 Starting at the front of the printer, push the right side cover onto the printer, fitting each slot on the cover over its corresponding
  • Lexmark C510 | Setup Guide - Page 19
    the other bracket with the hole on the left side of the printer as shown. Press the bracket flat against the printer, and then tighten the thumbscrew. 4 Starting at the front of the printer, push the left side cover onto the printer, fitting each slot on the cover over its corresponding tab on the
  • Lexmark C510 | Setup Guide - Page 20
    Attaching an operator panel overlay If English is not your preferred language and your printer shipped with an operator panel overlay, attach the overlay that has the appropriately translated Rub firmly to transfer the overlay labels. 3 Peel the overlay off the printer. Prepare the printer 15
  • Lexmark C510 | Setup Guide - Page 21
    is enabled. 1 Load plain paper in both trays. 2 From the printer operator panel, press Menu until you see Setup Menu, and then press 2, and then press Select. 5 Press Go. Two pages print. 6 Follow the instructions on the printed pages to determine the left margin value you need. 7 Repeat steps
  • Lexmark C510 | Setup Guide - Page 22
    continuing. Your printer supports an optional duplex unit which lets you print on both sides of a page. 1 Unpack the duplex unit and discard the packing material. Note: When you add or remove the optional duplex unit, remember to update the printer configuration through your printer driver. 2 Use
  • Lexmark C510 | Setup Guide - Page 23
    into the lower opening as shown. 4 Pull up on the top of the duplex unit as you swing it up over the top of the printer, and then press it down so that it locks fully into the upper opening. When the duplex unit is mounted correctly, there is a small and
  • Lexmark C510 | Setup Guide - Page 24
    turn it clockwise to tighten it fully. If necessary, use a flathead screwdriver to tighten the screws. Then, push the thumbscrews firmly toward the printer to collapse them. Note: Failure to collapse the green thumbscrews can cause jams. 8 Push up the redrive assembly and close duplex rear door
  • Lexmark C510 | Setup Guide - Page 25
    9 Hook the bracket into the slot, and then turn the mounting screw clockwise to tighten. 10 Plug in the duplex connector as shown. The duplex connector release latch must face away from the duplex unit. Set up the optional duplex unit 20
  • Lexmark C510 | Setup Guide - Page 26
    selected. 1 Load plain paper in the standard tray. 2 From the printer operator panel, press Menu until you see Setup Menu, and then Duplex, and then press Select. 5 Press Go. Two pages print. 6 Follow the instructions on the printed pages to determine the left margin value you need. 7 Repeat steps
  • Lexmark C510 | Setup Guide - Page 27
    the power cord before continuing. Note: You need a small Phillips screwdriver to remove the system board access cover. You can customize your printer memory capacity and connectivity by adding optional cards. The instructions in this section help you install any of the following: • Memory cards
  • Lexmark C510 | Setup Guide - Page 28
    Electronic components can be damaged by rough handling or static electricity. Touch something metal on the printer before you touch any card. Handles Follow the instructions in this section to remove the printer system board. 1 Remove the four screws at the corners of the system board. 2 Slide the
  • Lexmark C510 | Setup Guide - Page 29
    the instructions in this section to install printer memory. 1 Unpack the optional printer memory card. Avoid touching the connection points along its edge. Save the packaging materials. 2 Open both latches on the connector completely. Note: Some memory and firmware options offered for other Lexmark
  • Lexmark C510 | Setup Guide - Page 30
    card Note: Firmware cards offered for other Lexmark printers cannot be used with your printer. Warning: Firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. Plastic pins Follow the instructions in this section to install flash memory
  • Lexmark C510 | Setup Guide - Page 31
    2 Holding the flash memory or firmware card by its sides, align the plastic pins on the card with the holes on the system board. 3 Push in until the flash memory or firmware card is firmly in place. Cards Note: The row of metal pins on the firmware card must be fully inserted along its entire length
  • Lexmark C510 | Setup Guide - Page 32
    Reinstalling the system board Follow the instructions below to reinstall the system board. 1 Orient the system board as shown and align it with the tracks in the printer slot. 2 Push the system board firmly and evenly into the printer. Make sure the system board is pushed completely into the
  • Lexmark C510 | Setup Guide - Page 33
    A4 paper, make sure you change the Paper Type and Paper Size settings for that tray. Refer to the publications CD for detailed information. Your printer has one standard tray with a capacity of 250 sheets. If you have installed an optional drawer, it can hold an additional 530 sheets, for a total
  • Lexmark C510 | Setup Guide - Page 34
    Loading the trays Follow these instructions to load paper in the standard and optional trays. 1 Pull the tray completely out. Note: The length and width guides in an optional 530-sheet tray are shaped differently than the guides in the standard tray, but the function is the same. 2 If you are
  • Lexmark C510 | Setup Guide - Page 35
    loading, according to the size indicators on the bottom front of the tray. 4 Squeeze the tabs at the sides of the width guide together as shown. Slide the width guide to the correct position for the size of paper you are loading, according to the size indicators on the bottom left of
  • Lexmark C510 | Setup Guide - Page 36
    6 Load the stack with the recommended print side faceup. Load the stack toward the rear of the tray as shown. If you load letterhead paper, place the header faceup at the rear of the tray as shown. For two-sided printing, place the header facedown at the front of the tray. Warning: When you load
  • Lexmark C510 | Setup Guide - Page 37
    computers also support USB connections. Refer to your computer operating system documentation to see if your system supports USB. A USB port requires a USB cable such as Lexmark part number 12A2405 (2 m [6.5 ft]). Be sure to match the USB symbol on the cable to the USB symbol on the printer. Attach
  • Lexmark C510 | Setup Guide - Page 38
    Parallel A parallel port is included on base printer models. A parallel port requires an IEEE-1284 compliant parallel cable such as Lexmark part number 1329605 (3 m [10 ft]). Serial A serial port can be attached through the INA port on the printer system board. A serial port requires a compatible
  • Lexmark C510 | Setup Guide - Page 39
    one end of the standard network cable into a LAN drop or hub and the other end into the Ethernet port on the back of the printer. The printer automatically adjusts for the network speed. Use Category 5 cable with an RJ-45 connector for the standard network port. 802.11b wireless options Your
  • Lexmark C510 | Setup Guide - Page 40
    see a message other than Ready on the display, refer to the publications CD for instructions on clearing the message. Click Printing, and then click Understanding printer messages. 3 If you have attached your printer locally, turn on your computer and any other peripherals. What do I do next? For
  • Lexmark C510 | Setup Guide - Page 41
    Note: For Windows operating systems, you can skip the hardware wizard and use the drivers CD to install your printer drivers. Launch the CD and follow the instructions to install printer software. A local printer is a printer attached to your computer using a USB or parallel cable. If your
  • Lexmark C510 | Setup Guide - Page 42
    . To obtain all the features of the custom driver, you will need to install the custom printer driver using the drivers CD that shipped with the printer. Drivers are also available in downloadable software packages on our Lexmark Web site at www.lexmark.com. Using Windows XP or Windows Server 2003
  • Lexmark C510 | Setup Guide - Page 43
    Me with USB or parallel cable Note: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions. When the Found New Hardware Wizard screen appears: 1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next. 2 Select
  • Lexmark C510 | Setup Guide - Page 44
    those in the instructions. 7 Use the default printer name or type a unique name for your printer, and then printer driver on the drivers CD: D:\Drivers\WIN_9X\english 10 Click OK. 11 After the printer driver is found, click Next. 12 Use the default printer name or type a unique name for your printer
  • Lexmark C510 | Setup Guide - Page 45
    is not available for Windows NT operating systems. Note: You need administrative access to install printer drivers on your computer. Using Windows 95 with a parallel cable Note: USB support is not available for Windows 95 operating systems. 15 Click Finish to complete the installation. You are
  • Lexmark C510 | Setup Guide - Page 46
    Note: A PPD file provides detailed information about the capabilities of a printer to your Macintosh computer. Note: A PPD for your printer is also available in a downloadable software package on our Lexmark Web site at www.lexmark.com. Macintosh OS 8.6 or later is required for USB printing. To
  • Lexmark C510 | Setup Guide - Page 47
    in the Printer List, you can quit Print Center. UNIX/Linux Local printing is supported on many UNIX and Linux platforms, such as Sun Solaris and Red Hat. The Sun Solaris and Linux packages are available on the drivers CD and on our Lexmark Web site at www.lexmark.com. The Install drivers for local
  • Lexmark C510 | Setup Guide - Page 48
    User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments. All the printer driver packages support local printing using a parallel connection. The driver package for Sun Solaris supports USB connections to Sun Ray appliances and
  • Lexmark C510 | Setup Guide - Page 49
    or an option is not listed, check your installation. The Network Setup page provides information that is needed if you are attaching your printer to a network. This is also a good time to print Quick Reference and Clearing Jams information. See "Printing Quick Reference information" on page 45
  • Lexmark C510 | Setup Guide - Page 50
    you add or remove these options: 530-sheet tray, duplex unit, printer or flash memory, or firmware card, remember to update the printer configuration through your printer driver. If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the option. See
  • Lexmark C510 | Setup Guide - Page 51
    3 Print the document. To print Quick Reference pages stored in the printer: 1 Make sure the printer is on. 2 Press Menu until you see UTILITIES MENU, and then press Select. 3 Press Menu until you see Quick Reference, and then press Select. 4 Press
  • Lexmark C510 | Setup Guide - Page 52
    an IP address is automatically assigned after you connect the network cable to the printer. 1 Look for the address under the "TCP/IP" heading on the using DHCP, then you must manually assign an IP address to the printer. An easy way to do this is to use the printer operator panel: 1 Press Menu
  • Lexmark C510 | Setup Guide - Page 53
    on the network, you should receive a reply. If your printer has an optional ImageQuick firmware card installed, you can configure for Pull Printing once an IP address has been assigned to the printer. For detailed configuration instructions, refer to the CD that shipped with the ImageQuick firmware
  • Lexmark C510 | Setup Guide - Page 54
    the installation of a printer driver and the creation of a network printer port. Supported printer drivers • Windows system printer driver • Lexmark custom printer driver System drivers are built into Windows operating systems. Custom drivers are available on the drivers CD. Updated system and
  • Lexmark C510 | Setup Guide - Page 55
    and network port: 1 Launch the drivers CD. 2 Click Install Printer and Software. 3 Click Printer. 4 Click Agree to accept the license agreement. 5 Select Quick install, and then click Next. 6 Click Create new port. 7 Click Add Port. 8 Select Lexmark TCP/IP Network Port, and then click Add. 9 Enter
  • Lexmark C510 | Setup Guide - Page 56
    (which will act as a server), follow these steps to configure your network printer for shared printing: Step 1: Install a custom printer driver 1 Launch the drivers CD. 2 Click Install Printer and Software. 3 Click Printer. 4 Click Agree to accept the license agreement. 5 Select Quick install, and
  • Lexmark C510 | Setup Guide - Page 57
    host name of the server and look for the shared name you assigned to the printer. Step 3: Install the printer driver (or subset) on network clients Using the point and print method With this method, a subset of driver information is copied from the server to the client computer. This is just enough
  • Lexmark C510 | Setup Guide - Page 58
    either create a desktop printer on the computer (Mac OS 8.6-9.x) or create a print queue in Print Center (Mac OS X). Follow the instructions for your operating system: Operating system Mac OS 8.6 to 9.x Mac OS X version 10.1.2 and later Go to page... 54 55 Install drivers for network printing 53
  • Lexmark C510 | Setup Guide - Page 59
    was previously installed, go on to "Step 2: Create a desktop printer" on page 54. Step 1: Install a custom PPD file 1 Insert the drivers CD into your CD-ROM drive. 2 Double-click Classic. 3 Double-click the Lexmark Installer icon. 4 Select the language of your operating system, and then click
  • Lexmark C510 | Setup Guide - Page 60
    Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms. Lexmark provides a printer driver package for each supported UNIX and Linux platform. The User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux
  • Lexmark C510 | Setup Guide - Page 61
    NetWare You can download these packages from our Lexmark Web site. You may also find the driver package you need on the drivers CD. Your printer supports both Novell Distributed Print Services (NDPS) and regular queue-based NetWare environments. For the latest information about installing a network
  • Lexmark C510 | Setup Guide - Page 62
    Note: The publications CD is shipped inside the Setup Guide. Launch the publications CD and browse the contents to printer operator panel • Instructions for replacing supplies • Solutions to common printing problems • Methods for clearing jams • Overview of printer menus • Explanation of printer
  • Lexmark C510 | Setup Guide - Page 63
    drive or intranet site. • Print the information on the publications CD and store it near the printer for easy access. • Send Lexmark's printer documentation URL to printer users (www.lexmark.com/publications). Users with Internet access can browse the site. Storing Quick Reference information We
  • Lexmark C510 | Setup Guide - Page 64
    , refer to the country-specific warranty information that came with your printer. Lexmark C510 This Statement of Limited Warranty applies to this product if it Lexmark authorized servicer in your area, please contact Lexmark at 1-859-2323000, or on the World Wide Web at http://support.lexmark.com
  • Lexmark C510 | Setup Guide - Page 65
    authorized servicer • Operation of a product beyond the limit of its duty cycle • Failure to have installed a maintenance kit as specified (if applicable) • Use of printing media outside of Lexmark specifications • Use of other than Lexmark supplies (such as toner cartridges, inkjet cartridges, and
  • Lexmark C510 | Setup Guide - Page 66
    P/N 20K1030 E.C. 2K0125 Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2003 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 www.lexmark.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
www.lexmark.com
Setup Guide
December 2003
C510