Lexmark C510 Setup Guide - Page 39
Attaching a networkcable, Ethernet, 11b wireless, options
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Attaching a network cable Ethernet You can attach your printer to a network using standard network cables. A 10BaseT/100BaseTX Fast Ethernet port is standard on the network model. To attach the printer to a network: 1 Make sure the printer is turned off and unplugged. 2 Plug one end of the standard network cable into a LAN drop or hub and the other end into the Ethernet port on the back of the printer. The printer automatically adjusts for the network speed. Use Category 5 cable with an RJ-45 connector for the standard network port. 802.11b wireless options Your printer can be converted to wireless networking by using an optional 802.11b Wireless Print Adapter. This adapter is a piece of hardware that plugs into the Ethernet port on your printer. If you purchased this adapter for your printer, refer to the documentation that shipped with the adapter for installation and configuration. Attach cables 34