Lexmark C510 Setup Guide - Page 28
Removing the system board, of the printer. - firmware
 |
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removing the system board Warning: Electronic components can be damaged by rough handling or static electricity. Touch something metal on the printer before you touch any card. Handles Follow the instructions in this section to remove the printer system board. 1 Remove the four screws at the corners of the system board. 2 Slide the system board straight out of the printer. Note: The system board may be tightly seated in the printer. You may need to pull firmly on the handles. Install memory, firmware, or option cards 23
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23 -
24 -
25 -
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
 |
 |
23
Install memory, firmware, or option cards
Removing the system board
Follow the instructions in this section to
remove the printer system board.
Warning:
Electronic components can be
damaged by rough handling or static electricity.
Touch something metal on the printer before
you touch any card.
1
Remove the four screws at the
corners of the system board.
2
Slide the system board straight out
of the printer.
Note:
The system board may be tightly seated in the
printer. You may need to pull firmly on the handles.
Handles