Lexmark C510 Setup Guide - Page 16
Step3: Position the optional drawer - drivers
View all Lexmark C510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 3: Position the optional drawer CAUTION: If you are adding an optional drawer sometime after setting up the printer, be sure to turn the printer off, unplug the power cord, and disconnect all cables from the back of the printer before completing these tasks. Your printer supports an optional 530-sheet drawer. The optional drawer consists of a support unit and a tray. 1 Unpack the box. Enclosed are: • a support unit with the tray inside • two side covers (left and right) • two metal brackets (left and right) with thumbscrews 2 Remove all packing material and tape from the support unit. 3 Pull the tray out of the support unit. Remove any packing material and tape from the tray. 4 Move the support unit to the location selected for the printer. 5 Tip the tray slightly and push it fully into the support unit. Note: When you add or remove the optional drawer, remember to update the printer configuration through your printer driver. Position the optional drawer 11