Lexmark C522 Service Manual - Page 313

5022-xxx Top cover camshaft assembly removal See "Top cover camshaft assembly" on page 7-13 for the part number. 1. Remove the top access door 24 V interlock switch. See "Top access door 24 V interlock switch removal" on page 4-85. 2. Remove the left cover. See "Operator panel outer bezel removal" on page 4-21. 3. Rotate the lever arm (A) all the way up as if the top access door were open; hold the lever arm (A) in place, and rotate the camshafts (B) down to the closed position. 4. While still holding the lever arm (A) up, remove the left front mounting screw (C) and flip the right lock (D) back. 5. Continue to hold the lever arm (A) up, and remove the right front mounting screw (E); release the lever arm. 6. Remove the e-clip (F). 7. Slide the lever arm (A) and the spring (G) off the shaft. Warning: When removing the right rear mounting screw, be careful not to damage or remove the spring that mounts over the screw. 8. Remove the rear mounting screws (H). 9. Remove the top cover camshaft assembly. A D E F H H G C B B 4-86 Service Manual