Lexmark C530DN Clearing Jams Guide

Lexmark C530DN - C 530dn Color Laser Printer Manual

Get Lexmark C530DN - C 530dn Color Laser Printer PDF manuals and user guides
UPC - 734646030908
View all Lexmark C530DN manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C530DN manual content summary:

  • Lexmark C530DN | Clearing Jams Guide - Page 1
    recommended media. For more information, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications. • For detailed information about purchasing large quantities of customized media, see the Card Stock & Label Guide. • Do not load too much media. Make sure the
  • Lexmark C530DN | Clearing Jams Guide - Page 2
    Jam in the duplex "Jams under the rollers page-turnaround area near the fuser" on page 5 230.xx Jam in the duplex area "Jams in the duplex Paper Jam area" on page 5 241.xx Jam in Tray 1 Paper Jam "Clearing jams just beyond Tray 1" on page 2 242.xx Jam in Tray 2 Paper Jam "Clearing
  • Lexmark C530DN | Clearing Jams Guide - Page 3
    2 jams If the paper did not feed from Tray 2 correctly, the jam is in the tray. 242.xx Paper Jam appears. 1 Open Tray 2. 2 Remove the jam. If the paper fed from Tray 2, but is caught between Tray 1 and Tray 2, 242.xx Paper Jam may appear. 1 Open Tray 2. 2 Grasp the paper on both sides. Pull it out
  • Lexmark C530DN | Clearing Jams Guide - Page 4
    the User's Guide. Clear the these instructions to fuser or fuser cover Jams under the fuser or fuser cover When paper is jammed under the fuser or the fuser cover, 201.xx Paper Jam appears. CAUTION-HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. Wait for the fuser
  • Lexmark C530DN | Clearing Jams Guide - Page 5
    inner door. 2 Pull the paper gently up and to the rear of the printer. Grasp the paper, and pull it away from the bin. Clearing jams Jam appears. Clearing jams in the duplex path Jams under the rollers near the fuser When paper is jammed under the rollers near the fuser, 203.xx Paper Jam appears.
  • Lexmark C530DN | Clearing Jams Guide - Page 6
    into the manual feeder, the display prompts you to insert paper. If the paper is pushed far enough into the manual feeder for the printer to sense it, but not far enough to feed properly, 200.xx Paper Jam appears. In either case, push the paper farther into the manual feeder. 3 Replace the tray. 6
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Lexmark™ C53x
Clearing Jams Guide
Clearing jams
Avoiding jams
The following hints can help you avoid jams:
•
Use only recommended media.
For more information, see the
Card Stock & Label Guide
available on the Lexmark Web site at
www.lexmark.com/publications
.
•
For detailed information about purchasing large quantities of
customized media, see the
Card Stock & Label Guide
.
•
Do not load too much media. Make sure the stack height does
not exceed the indicated maximum height.
•
Do not load wrinkled, creased, damp, or curled media.
•
Flex, fan, and straighten media before loading it.
•
Do not use media that has been cut or trimmed by hand.
•
Do not mix media sizes, weights, or types in the same stack.
•
Store the media in an appropriate environment.
•
Do not remove trays while the printer is printing. Wait for
Load
tray <x>
or
Ready
to appear before removing a tray.
•
Do not load the manual feeder while the printer is printing.
Wait for
Load manual feeder with <x>
to appear.
•
Push all trays in firmly after loading media.
•
Make sure the guides in the trays are properly positioned and
are not pressing too tightly against the paper.
•
Make sure all media sizes and media types are set correctly in
the control panel menu.
•
Make sure all printer cables are attached correctly. For more
information, see the setup documentation.
Note:
If a jam occurs, clear the entire media path. For information
on the media path, see the
User's Guide
.
Identifying the paper path
The path that paper takes through the printer varies depending
on where the paper enters, and whether a duplex (two-sided) job
is being printed. When a jam occurs, a message indicating the jam
location appears. The following illustration indicates the area of
the printer the numbers in the messages describe.
Accessing jam areas
Open doors and covers, and remove trays to access jam areas. The
illustration shows the possible jam areas.
1
Upper door
2
Fuser cover
3
Inner door
4
Lower door
5
Standard tray (Tray 1)
6
Optional 550-sheet tray (Tray 2)
7
Exit bin
Use the following table to locate instructions for a particular jam.
Note:
To resolve any message, all media must be cleared from the
entire media path.
1