Lexmark C530DN Clearing Jams Guide - Page 4

Clearing jams behind the inner door If the paper is jammed behind the inner door, but not under the photoconductors, 200.xx Paper Jam appears. Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the inner door open longer than 10 minutes. 1 Open the upper and inner doors. The lower door opens with the inner door. 2 Pull the jammed paper up and out. Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the inner door open longer than 10 minutes. 1 Open the upper and inner doors. The lower door opens with the inner door. 2 Determine where the jam is located: a If paper is visible under the fuser, grasp it on each side and pull it forward. 3 If the paper will not move, remove all four photoconductors (for more information, see the User's Guide. Clear the jam, and then replace the photoconductors. 3 Close the lower door, and then close the upper door. Jams under the photoconductors Follow these instructions to remove jams under the photoconductors. If the paper is jammed under the photoconductors, 200.xx Paper Jam or 201.xx Paper Jam may appear. 1 Open the upper and inner doors. The lower door opens with the inner door. 2 Pull the jammed paper out straight. Note: Be careful not to dislodge the photoconductors. 4 Close the lower door, and then close the upper door. Clearing jams under the fuser or fuser cover Jams under the fuser or fuser cover When paper is jammed under the fuser or the fuser cover, 201.xx Paper Jam appears. CAUTION-HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. Wait for the fuser to cool before clearing jams from this area. 4 b Otherwise, grasp the fuser cover by the tabs and lift it. Pull the jammed paper up and out. Close the fuser cover. 3 Close the lower door, and then close the upper door.