Lexmark C782 Quick Reference - Page 1

Lexmark™ C78x Quick Reference Loading paper and specialty media Loading 500-sheet trays 1 Remove the tray and place it on a flat, level surface. 2 Squeeze the front guide lever and slide the guide to the front of the tray. 5 Place the paper in the tray as shown, print side down.Do not load bent or wrinkled paper. Maximum stack height indicator 3 Squeeze the two front guide levers and slide the guide to the correct position for the size paper you are loading. 6 Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper. LT.LG EX A5 B5 A4 LT.LG A5 EX B5 A4 4 Slide the bottom support toward the front of the tray until it touches the front guide. 3 Squeeze the side guide lever and slide the guide to the correct position for the size paper you are loading. Icons along the back of the tray indicate paper sizes. 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 7 Reinstall the tray. 8 Make sure the tray is pushed completely into the printer. Loading the 2000-sheet tray 1 Pull open the tray. 2 Squeeze the side guide lever, lift the guide, and place it into the appropriate slot for the size paper you are loading. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 6 Place the paper against the back left corner of the tray, print side down.