Lexmark C912 Setup Guide - Page 44

Installing an optioncard

Get Lexmark C912 PDF manuals and user guides View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Installing an option card Your printer has one expansion card slot that supports a number of option cards. The following table describes their function. Card MarkNet™ internal print server Serial/Parallel 1284-C Interface Card Coax/Twinax Adapter Card for SCS 802.11b Wireless Print Adapter Function Adds an Ethernet, Token-Ring, or Fiber port to connect your printer to a network. Install a MarkNet N2501e or N2401e internal print server if you received either of these cards as part of a multifunction printer upgrade. Adds an RS-232C serial and 1284-C parallel interface port. Adds a coaxial/twinaxial network port. Connects to a MarkNet internal print server to add US or international 802.11b wireless printing capability. Note: The network models ship with an Ethernet print server already installed. You need a small Phillips screwdriver to install these options. 1 Remove the system board access cover (see page 29). 2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off. Save the screw. Warning: Option cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch an option card. 3 Unpack the option card. Save the packing materials. Install memory and option cards 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Installing an option card
Your printer has one expansion card slot
that supports a number of option cards.
The following table describes their
function.
Card
Function
MarkNet™ internal print server
Adds an Ethernet, Token-Ring, or Fiber port to connect your printer to a 
network.
Install a MarkNet N2501e or N2401e internal print server if you received
either of these cards as part of a multifunction printer upgrade.
Serial/Parallel 1284-C Interface Card
Adds an RS-232C serial and 1284-C parallel interface port.
Coax/Twinax Adapter Card for SCS
Adds a coaxial/twinaxial network port.
802.11b Wireless Print Adapter
Connects to a MarkNet internal print server to add US or international
802.11b wireless printing capability.
Note:
The network models ship with an Ethernet print 
server already installed.
Warning:
Option cards are easily damaged by static
electricity. Touch something metal, such as the printer
frame, before you touch an option card.
You need a small Phillips screwdriver to
install these options.
1
Remove the system board access 
cover (see page 29).
2
Remove the screw from the metal 
plate that covers the connector
slot, and then lift the plate off.
Save the screw.
3
Unpack the option card.
Save the packing materials.
Install memory and option cards
35