Lexmark C912 Setup Guide - Page 61
Attaching a networkcable, Parallel, Ethernet
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Parallel A parallel port is standard on the base model. To attach the printer to a computer: 1 Connect the printer to the computer using a parallel cable. A base machine's parallel port requires a 1284 A-B parallel cable such as Lexmark part number 1329605 (3.05 m [10 ft]) or part number 1427498 (6.1 m [20 ft]). A parallel port on an RS-232C Serial/Parallel 1284-C Interface Card requires a 1284 A-C parallel cable, such as Lexmark part number 11K4078 (1.83 m [6 ft]). 2 Go to "Turning on the printer" on page 53. Attaching a network cable Ethernet You can attach your printer to a network using standard network cables. A 10BaseT/100BaseTX Fast Ethernet port is standard on the network model. To attach the printer to a network: 1 Make sure the printer is turned off and unplugged. 2 Connect the printer to a LAN drop or hub using standard cabling that is compatible with your network. The printer automatically adjusts for the network speed. 3 Go to "Turning on the printer" on page 53. Use a Category 5 cable with an RJ-45 connector for the standard network port. Attach cables 52