Lexmark Dot Matrix Quick Reference - Page 11
Loading a cut form or envelope manually, If Auto Cut Sheet Load is set
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Loading a cut form or envelope manually 1 Clear the paper path. 2 If continuous forms are currently loaded, tear off any used forms and press Load/Unload to park the continuous forms. The Paper Out light is blinking. 3 Set the forms thickness lever. For help, see "Setting the forms thickness lever" on page 7. 4 Move the paper select lever up to cut forms . 5 Open the manual feed door. 6 Set the left margin. Move the left paper guide so that the print start position you want aligns with the [A symbol printed on the margin guide. 7 Place a cut form or envelope against the left paper guide. 8 Move the right paper guide against the right edge of the paper. 9 Insert paper into the printer until the Paper Out light stops blinking. a If Auto Cut Sheet Load is set to On, the paper feeds automatically to the Top-Of-Form. b If Auto Cut Sheet Load is set to Off, press FormFeed. 10 Printer is online (Ready light On solid). If it is not, press Start/Stop until the Ready light is On solid. 11