Lexmark Dot Matrix Quick Reference - Page 17
Changing from continuous forms to a cut sheet or envelope - printer sound
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting Top-Of-Form for a cut form or envelope Top-Of-Form can range from minus 1 to plus 22 inches from the top of cut sheet paper. 1 Press FormFeed to clear paper path. If the Paper Out light is Off, tear off excess forms and press Load/Unload. 2 Move paper select lever to the cut forms. 3 Load a cut sheet of paper or envelope through the manual feed door. 4 The printer moves the paper or envelope to the current Top-Of-Form, if Auto Cut Sheet is set to On. If not, press FormFeed when the Paper Out light goes Off. 5 Open the operator panel to layer 2. 6 Press any paper movement button (LineFeed, Micro ↑, Micro ↓) to align the Top-Of-Form you want with the horizontal lines (located on the platen). 7 Press Set TOF to set and save Top-Of-Form. 8 Close the operator panel cover. 9 Press Start/Stop to put the printer online. Changing from continuous forms to a cut sheet or envelope Load/Unload parks (unloads) continuous forms so you can insert a cut form or envelope into the manual feed door to print or load paper to the current Top-Of-Form. 1 Make sure the tractor unit is in the push position. 2 Tear off the continuous form at the perforation. 3 Move the paper select lever down to continuous forms. 4 Press Load/Unload. The continuous form paper moves out of the paper path. The Paper Out light blinks and the paper out alarm sounds. 5 Move the paper select lever up to cut forms. 17